新しいマシンではないのだが、Lenovo Edge E530でNetBSD/amd64-currentを起動させてみたので、dmesgを掲載しておく。
Amazon.co.jpで見てみると、中古で27,000円くらいで買えるらしい。
キーボードがあまり使いやすくないので、お勧めできないと思うが…
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.71 (GENERIC) #0: Thu May 11 18:44:50 UTC 2017
mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 1637 MB
avail memory = 1568 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 32591G0 (ThinkPad Edge E530)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x0000000078FFE170 0000AC (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: FACP 0x0000000078FED000 00010C (v05 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: DSDT 0x0000000078FEF000 00B57F (v02 LENOVO TP-H0 00002500 INTL 20061109)
ACPI: FACS 0x0000000078F69000 000040
ACPI: SLIC 0x0000000078FFD000 000176 (v01 LENOVO TP-H0 00002500 PTL 00000001)
ACPI: SSDT 0x0000000078FFC000 000518 (v02 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: SSDT 0x0000000078FFB000 0006A5 (v02 LENOVO PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 0x0000000078FEE000 0000A5 (v32 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: HPET 0x0000000078FEB000 000038 (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: APIC 0x0000000078FEA000 000098 (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: MCFG 0x0000000078FE9000 00003C (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: FPDT 0x0000000078FE8000 000064 (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: SSDT 0x0000000078FE7000 0009AA (v02 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x0000000078FE6000 000A92 (v02 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x0000000078FE5000 00003E (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: UEFI 0x0000000078FE4000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: MSDM 0x0000000078F64000 000055 (v03 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: SSDT 0x0000000078FE3000 0000D0 (v02 LENOVO IffsAsl 00003000 INTL 20061109)
ACPI: UEFI 0x0000000078FE2000 0002BA (v01 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: DBG2 0x0000000078FE1000 0000A5 (v00 LENOVO TP-H0 00002500 PTL 00000002)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, id 0x206a7
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, id 0x206a7
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, id 0x206a7
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz, id 0x206a7
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId , AslId
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE804034A010 00083B (v02 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8065A67010 000303 (v02 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80402CCCD0 000119 (v02 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
thinkpad0 at acpi0 (HKEY, LEN0068)
acpiwmi0 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
pckbc1 at acpi0 (PS2K, LEN0071) (kbd port): io 0x60,0x64 irq 1
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
pckbc2 at acpi0 (MOU, LEN0032) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
PTID (INT340E) at acpi0 not configured
IFFS (INT3392) at acpi0 not configured
acpitz0 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz0: levels: critical 100.0 C, passive 95.0 C, passive cooling
ACPI: Enabled 5 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 8.1
pms0: Extended W mode, Passthrough, Palm detect, One button click pad, Multi-finger Report, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0104 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0116 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi0 vec 0 (i915)
drm: Wrong MCH_SSKPD value: 0x16040307
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80001ded1000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 14f1 product 506e
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci1 dev 0 function 0: vendor 10ec product 5229 (rev. 0x01)
rtsx0: interrupting at msi3 vec 0
sdmmc0 at rtsx0
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
ppb1: PCI Express capability version 2 x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 14e4 product 4727 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4)
ppb2: PCI Express capability version 2 x1 @ 5.0GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 8086 product 1e16 (rev. 0xc4)
ppb3: PCI Express capability version 2 x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 12
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
re0: interrupting at msi4 vec 0
re0: Ethernet address b8:88:e3:ef:c2:6c
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e57 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 104 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2300 MHz
acpicpu0: P1: FFH, lat 10 us, pow 32872 mW, 2200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 31127 mW, 2100 MHz
acpicpu0: P3: FFH, lat 10 us, pow 29079 mW, 2000 MHz
acpicpu0: P4: FFH, lat 10 us, pow 27406 mW, 1900 MHz
acpicpu0: P5: FFH, lat 10 us, pow 25766 mW, 1800 MHz
acpicpu0: P6: FFH, lat 10 us, pow 23837 mW, 1700 MHz
acpicpu0: P7: FFH, lat 10 us, pow 22265 mW, 1600 MHz
acpicpu0: P8: FFH, lat 10 us, pow 20726 mW, 1500 MHz
acpicpu0: P9: FFH, lat 10 us, pow 18904 mW, 1400 MHz
acpicpu0: P10: FFH, lat 10 us, pow 17432 mW, 1300 MHz
acpicpu0: P11: FFH, lat 10 us, pow 15996 mW, 1200 MHz
acpicpu0: P12: FFH, lat 10 us, pow 14282 mW, 1100 MHz
acpicpu0: P13: FFH, lat 10 us, pow 12907 mW, 1000 MHz
acpicpu0: P14: FFH, lat 10 us, pow 11563 mW, 900 MHz
acpicpu0: P15: FFH, lat 10 us, pow 9956 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=85
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2294970720 Hz quality 3000
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: SanDisk (0x781) Extreme (0x5580), rev 3.00/0.10, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: disk removable
wd0 at atabus0 drive 0
wd0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0(umass0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Logical Unit Is In Process Of Becoming Ready
sd0: drive offline
sd0: fabricating a geometry
sd0: 59870896 trailing sectors not covered by disklabel
uhub4 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub5: 6 ports with 6 removable, self powered
ubt0 at uhub5 port 3
ubt0: Broadcom Corp (0xa5c) BCM20702A0 (0x21f4), rev 2.00/1.12, addr 3
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
spkr2 at audio1: PC Speaker (synthesized)
sd0: 59870896 trailing sectors not covered by disklabel
sd0: 59870896 trailing sectors not covered by disklabel
sd0: 59870896 trailing sectors not covered by disklabel
sd0: 59870896 trailing sectors not covered by disklabel
WARNING: 7 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
sd0: 59870896 trailing sectors not covered by disklabel
root file system type: ffs
kern.module.path=/stand/amd64/7.99.71/modules
acpibat0: normal capacity on 'charge state'
0 件のコメント:
コメントを投稿
注: コメントを投稿できるのは、このブログのメンバーだけです。