NetBSD on Panasonic CF-S10ETHDS

ちょっとした理由で、Panasonic Let's Note CF-S10を使う機会があったので、NetBSD/amd64 currentを動かしてみた。build.sh live-imageの作ってくれるlive imageをUSB stickに書き込んで使った。

CF-S10は左右にUSB端子があるのだが、右側はUSB 3.0専用らしく、そこにUSB stickを差し込むと7.99.27はsd0がなくroot file systemが見付けられずに起動できなかった。左側の端子にUSB stickを差し込めば問題ない。

NetBSD/amd64 7.99.29にしたdmesgは紛失してしまったのだが、7.99.29ではXHCI USB 3.0が有効になっているので、右側の端子に差し込んでもちゃんと起動する。

native X.orgも何も設定することなく起動した。

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.27 (GENERIC) #0: Tue Apr 19 08:46:20 JST 2016
 ryo_on@brownie:/usr/world/7.99/amd64/obj/sys/arch/amd64/compile/GENERIC
total memory = 3983 MB
avail memory = 3847 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Panasonic Corporation CF-S10ETHDS (003)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0430 000024 (v02 MATBIO)
ACPI: XSDT 0x00000000DAFFEE18 000094 (v01 MATBIO CFS10-3  06222004 MSFT 00010013)
ACPI: FACP 0x00000000DAFFDC18 0000F4 (v04 MATBIO CFS10-3  06222004 MSFT 00010013)
ACPI: DSDT 0x00000000DAFF1018 00B278 (v01 MATBIO CFS10-3  00000000 INTL 20091112)
ACPI: FACS 0x00000000DAFD4E40 000040
ACPI: FACS 0x00000000DAFD4D40 000040
ACPI: APIC 0x00000000DAFFDF18 0000CC (v02 MATBIO CFS10-3  06222004 MSFT 00010013)
ACPI: HPET 0x00000000DAFFFF18 000038 (v01 MATBIO CFS10-3  06222004 AMI. 00000003)
ACPI: SLIC 0x00000000DAFF0E18 000176 (v01 MATBIO CFS10-3  06222004 AMI  00010013)
ACPI: MCFG 0x00000000DAFFFE98 00003C (v01 MATBIO CFS10-3  06222004 MSFT 00000097)
ACPI: SSDT 0x00000000DAFEF018 000846 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
ACPI: SSDT 0x00000000DAFEE018 0009A0 (v01 PmRef  CpuPm    00003000 INTL 20091112)
ACPI: SSDT 0x00000000DAFEDA98 0002EC (v01 PmRef  Cpu0Tst  00003000 INTL 20091112)
ACPI: SSDT 0x00000000DAFEC918 000452 (v01 PmRef  ApTst    00003000 INTL 20091112)
ACPI: DMAR 0x00000000DAFFDA98 0000E8 (v01 INTEL  SNB      00000001 INTL 00000001)
ACPI: SSDT 0x00000000DAF81018 006DF3 (v01 DppmRe OemDppm  00001000 INTL 20091112)
ACPI: TCPA 0x00000000DAFFFE18 000032 (v02 MATBIO CFS10-3  00000001 MSFT 01000013)
ACPI: ASF! 0x00000000DAFFEA18 000074 (v32 MATBIO CFS10-3  06222004 INTL 000F4240)
ACPI: SSDT 0x00000000DAFED718 0002DB (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, id 0x206a7
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, id 0x206a7
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, id 0x206a7
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, id 0x206a7
acpi0 at mainbus0: Intel ACPICA 20160108
acpi0: X/RSDT: OemId , AslId 
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D4EA340 000056 (v01 DynTbl VistaTbl 00000001 INTL 20091112)
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810722C010 000869 (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8107196810 000303 (v01 PmRef  ApIst    00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810712E010 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
OPRM (PNP0C02) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pckbc1 at acpi0 (K106, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0502) (aux port): irq 12
TPM (IFX0102) at acpi0 not configured
TFN1 (INT3404) at acpi0 not configured
TSK1 (INT3403) at acpi0 not configured
TSK2 (INT3403) at acpi0 not configured
T_VR (INT3403) at acpi0 not configured
TCG1 (INT3403) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
TMEM (INT3402) at acpi0 not configured
BEXA (PNP0C02) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
MISC (MAT0021) at acpi0 not configured
HKEY (MAT0019) at acpi0 not configured
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
acpibat0: Panasonic LION rechargeable battery
acpibat0: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh
acpilid0 at acpi0 (LID, PNP0C0D-0): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C-0): ACPI Power Button
DDRC (PNP0C02) at acpi0 not configured
DPPM (INT3400) at acpi0 not configured
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 105.0 C, passive cooling
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 130.0 C, passive 81.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Two button click pad
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0104 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0126 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: Wrong MCH_SSKPD value: 0x17050407
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800046c17000, size 1280x800, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 0103 (miscellaneous DASP, revision 0x09) at pci0 dev 4 function 0 not configured
vendor 8086 product 1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 6 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0xe0e0, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 70:58:12:dc:41:d4
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2805
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1c10 (rev. 0xb4)
ppb0: PCI Express capability version 2  x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1c12 (rev. 0xb4)
ppb1: PCI Express capability version 2  x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1033 product 0194 (USB serial bus, xHCI, revision 0x04) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 8086 product 1c14 (rev. 0xb4)
ppb2: PCI Express capability version 2  x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: vendor 8086 product 0087 (rev. 0x5e)
iwn0: interrupting at ioapic0 pin 18
iwn0: MIMO 1T2R, MoW, address 64:80:99:45:17:f4
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 3: vendor 8086 product 2448 (rev. 0xb4)
ppb3: PCI Express capability version 2  x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
cbb0 at pci4 dev 0 function 0: vendor 1180 product e476 (rev. 0x02)
cbb0: cacheline 0x0 lattimer 0x0
cbb0: bhlc 0x820000
cbb0: interrupting at ioapic0 pin 19
cardslot0 at cbb0
cardbus0 at cardslot0: bus 5
pcmcia0 at cardslot0
ppb4 at pci0 dev 28 function 4: vendor 8086 product 1c18 (rev. 0xb4)
ppb4: PCI Express capability version 2  x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 13
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
rtsx0 at pci5 dev 0 function 0: vendor 10ec product 5209 (rev. 0x01)
rtsx0: interrupting at msi1 vec 0
sdmmc0 at rtsx0
sdhc0 at pci5 dev 0 function 1: vendor 10ec product 5209 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 17
sdhc0: SDHC 1.0, rev 0, PIO, 32000 kHz, HS 3.0V 3.3V, 512 byte blocks
sdmmc1 at sdhc0 slot 0
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1c4f (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xef20ff45
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1c22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
vendor 8086 product 1c24 (miscellaneous DASP, revision 0x04) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  80 us, pow   500 mW
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2601 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2600 MHz
acpicpu0: P2: FFH, lat  10 us, pow 31470 mW, 2400 MHz
acpicpu0: P3: FFH, lat  10 us, pow 28074 mW, 2200 MHz
acpicpu0: P4: FFH, lat  10 us, pow 24816 mW, 2000 MHz
acpicpu0: P5: FFH, lat  10 us, pow 22002 mW, 1800 MHz
acpicpu0: P6: FFH, lat  10 us, pow 18989 mW, 1600 MHz
acpicpu0: P7: FFH, lat  10 us, pow 16106 mW, 1400 MHz
acpicpu0: P8: FFH, lat  10 us, pow 13638 mW, 1200 MHz
acpicpu0: P9: FFH, lat  10 us, pow 10989 mW, 1000 MHz
acpicpu0: P10: FFH, lat  10 us, pow  8461 mW,  800 MHz
acpicpu0: T0: FFH, lat   1 us, pow  8461 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow  7896 mW,  94 %
acpicpu0: T2: FFH, lat   1 us, pow  7332 mW,  88 %
acpicpu0: T3: FFH, lat   1 us, pow  6768 mW,  82 %
acpicpu0: T4: FFH, lat   1 us, pow  6204 mW,  75 %
acpicpu0: T5: FFH, lat   1 us, pow  5640 mW,  69 %
acpicpu0: T6: FFH, lat   1 us, pow  5076 mW,  63 %
acpicpu0: T7: FFH, lat   1 us, pow  4512 mW,  57 %
acpicpu0: T8: FFH, lat   1 us, pow  3948 mW,  50 %
acpicpu0: T9: FFH, lat   1 us, pow  3384 mW,  44 %
acpicpu0: T10: FFH, lat   1 us, pow  2820 mW,  38 %
acpicpu0: T11: FFH, lat   1 us, pow  2256 mW,  32 %
acpicpu0: T12: FFH, lat   1 us, pow  1692 mW,  25 %
acpicpu0: T13: FFH, lat   1 us, pow  1128 mW,  19 %
acpicpu0: T14: FFH, lat   1 us, pow   564 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 265 cycle TSC drift observed
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ahcisata0 port 1: PHY offline
wd0 at atabus0 drive 0
wd0: 
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub1 port 1: vendor 8087 product 0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 8 ports with 8 removable, self powered
uhub3 at uhub0 port 1: vendor 8087 product 0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: SanDisk Extreme, rev 2.10/0.10, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0:  disk removable
umodem0 at uhub3 port 1 configuration 1 interface 1
umodem0: Ericsson F5521gw, rev 2.00/0.00, addr 3, iclass 2/2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub3 port 1 configuration 1 interface 3
umodem1: Ericsson F5521gw, rev 2.00/0.00, addr 3, iclass 2/2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub3 port 1 configuration 1 interface 9
umodem2: Ericsson F5521gw, rev 2.00/0.00, addr 3, iclass 2/2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Is in Process Of Becoming Ready

sd0: drive offline
sd0: fabricating a geometry
ugen0 at uhub3 port 3
ugen0: Intel(R) Corporation Intel(R) Centrino(R) Advanced-N + WiMAX 6250, rev 2.00/0.00, addr 4
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.27/modules

Comments

Popular posts from this blog

#5000へCメールを送れないau端末でezweb.ne.jpの電子メールアドレスをIMAP4/SMTPで扱う方法

Vaio Pro 11/13用のサードパーティーのACアダプター

Windows 7 Professional用のNFSクライアントを使う (NFS 4.1のみ)